Boral Roofing Company Nationwide

Boral Roofing Company in San Francisco: What to Know First

Boral roofing repair and replacement in San Francisco typically runs between $850 and $4,200 depending on whether you’re dealing with a cracked tile, failed underlayment, or a full reroof. We’re an independent Boral service provider, not a manufacturer affiliate, and we work on Boral concrete and clay tile roofs across the city, from the Sunset to Bernal Heights. Every job starts with a written price before any work begins. If you own a Boral roof and need a roofing company that knows the product line, call (831) 318-8819 for a free estimate.

Call (831) 318-8819

This page is for San Francisco homeowners with Boral tile roofs who need straight answers about repair costs, failure patterns, and what a proper fix actually involves. Whether you’ve got a leak near a valley, cracked tiles after a windstorm, or a flat section with failing torch-down, we’ll walk you through what we see on Boral roofs in this city and what it takes to fix them right.

Key Takeaways

• Boral tile roofs in San Francisco fail most often at flashing points and underlayment, not the tiles themselves.
• Repair costs for Boral work range from $850 for minor tile replacement to $4,200+ for underlayment or structural work.
• We carry Boral-compatible tile profiles and use OEM or matched aftermarket parts depending on availability and warranty status.
• Every Boral job comes with a written price up front and the 365-Day Done Right Promise in writing.

How Boral Products Fail – and How We Fix Them

Boral makes a solid tile. That said, we’ve been on enough San Francisco roofs to know exactly where things go wrong, and it’s rarely the tile itself. Here’s what we see on Boral roofs in this city and what we do about it:

• Failed underlayment beneath Boral Barcelona and Villa tiles. The tile can look fine while the felt or synthetic underlayment beneath it degrades from trapped moisture. San Francisco fog keeps roofs damp for months, and once underlayment goes, water finds the decking. We pull the tile in the affected area, replace the underlayment, and reset the tile. This is the most common Boral repair we do in the Sunset and Richmond districts.
• Cracked or spalled Boral concrete tiles from impact or freeze-thaw cycles. Concrete tiles in San Francisco absorb moisture, and while we don’t get hard freezes often, the fog-sun-fog cycle stresses tile. A cracked Boral tile lets water sit against the underlayment. We replace individual tiles with matching profile and color from Boral’s current line, or a quality color-matched aftermarket tile when the original color is discontinued. If we can’t match it well, we’ll tell you that before we quote.
• Valley and sidewall flashing failures on steep Boral installations. San Francisco hills mean steep pitches and complex valleys. The metal flashing at valleys and sidewalls corrodes or pulls away over time, and water runs behind the tile. We replace flashing with galvanized or copper depending on the existing system, then re-bed the tiles along the transition. This is where a lot of handyman repairs fail because the flashing wasn’t properly woven under the tile.
• Flat roof transitions where Boral tile meets torch-down or modified bitumen. A lot of San Francisco homes have Boral tile on the main roof and a flat section over a garage or rear addition. That transition point is a leak magnet. We’ve repaired dozens of these and we know to check the termination bar, the upturn height, and whether the roofer who did the flat section actually tied into the tile’s drainage plane. We fix it once.
• Broken or missing Boral ridge caps and hip tiles. Ridge and hip tiles take the most exposure and are first to crack or loosen. When they shift, wind-driven rain gets underneath. We rebed caps with fresh mortar or replace them with Boral-matched ridge pieces, and we inspect the full ridge line because one loose cap usually means others are heading that way.

Our Boral Roofing Company Process

Here’s how a Boral job goes with us, from the first call to the final walk-around:

1. 1
   You call and a live person answers. No voicemail, no automated menu. You describe the problem, we ask about your roof’s age, the tile profile if you know it, and where you’re seeing water or damage.
2. 2
   We schedule the inspection and show up in the promised window. A background-checked, uniformed technician gets on the roof and looks at the actual issue. We don’t quote from the ground. Travis Oakley personally reads roofs on most San Francisco estimates because he’d rather see the flashing and underlayment himself than trust a photo.
3. 3
   You get a written price before any work starts. The number on that sheet is the number. It doesn’t move at the door, and we don’t tack on change orders unless you ask for additional work and agree to a separate written price.
4. 4
   We make parts decisions with you. If Boral OEM parts are available and make sense, we use them. If a quality aftermarket tile matches better or the OEM part is backordered, we’ll explain the difference and let you choose. We never install a mismatched tile without flagging it first.
5. 5
   We repair, test, and clean up. After the fix, we water-test the area when possible and walk the job site to make sure no debris, broken tile, or fasteners are left behind. Your property looks like we were never there, except the roof works now.
6. 6
   You get the 365-Day Done Right Promise in writing. Every Boral repair and installation is guaranteed for one full year. If it fails within that period, we come back and fix it at no charge. Period.

What Boral Roofing Company Costs in San Francisco

Here are real price ranges for Boral work in San Francisco. These reflect what we’ve quoted and done across the city, not national averages that don’t account for our labor costs, roof pitches, and material logistics:

• Single tile replacement (Boral concrete or clay): $850 – $1,200 depending on access and whether we need to color-match a discontinued profile.
• Valley or sidewall flashing repair on a Boral roof: $1,100 – $1,900 depending on valley length and whether tiles need to be removed.
• Underlayment replacement in a contained section (under 200 sq ft): $1,800 – $2,800 including tile removal and reset.
• Flat-to-tile transition repair: $1,500 – $2,600 depending on the condition of the flat membrane and whether the termination needs redoing.
• Full Boral reroof on a typical San Francisco home: $22,000 – $38,000 depending on roof size, pitch, decking condition, and whether you’re replacing all tile or reusing existing.

What moves the price: roof access and pitch (steep roofs cost more in labor and safety setup), whether your tile profile is still in production, the condition of the decking beneath, and how much underlayment needs to come out. We’ll put the exact number in writing before any work starts. Call (831) 318-8819 for a free estimate on your Boral roof.

Why San Francisco Homeowners Call Brennan Roofing Co San Francisco for Boral Work

Most roofing companies in San Francisco can patch a tile. Few can tell you why a Boral Barcelona roof is leaking at the valley when the tiles look fine, or whether your underlayment has two years left or is already gone. That’s the difference. Travis Oakley and our crew have been reading Boral roofs in this city long enough to know what a salesman might oversell and what a cheap fix will cost you in six months. A good roof shouldn’t need to be talked about – it should just hold.

We operate under the Garrison Standard: written price before any work starts, background-checked uniformed technicians on every job, and a live person answering the phone around the clock. If your Boral roof needs work and you also want a second opinion on GAF, Owens Corning, or CertainTeed options for another section of the house, we can talk through those too. One crew, one standard, no surprises.

FAQs